Our
Mission
Our mission is to provide giant true scale RC model plans and kits for the inexperienced to the
master builder. Products include our Stock, Custom and Full Custom designs as defined below.
General Product
Information
The products are offered in giant scale; 100" plus wing span or
more. Basic dsign specifications can be review lower on this web page. There must be sufficant good data and information to design a truely scale model, this will be investigated before an estimate
oragreement are intered into. Once the agrement is entered into and the initial deposit is made it is binding and the deposit is not refunded.
Full Custom Design:
This design is to become the property of the builder and is done
on time and material basic, the design rate is $25.00/HR. The average design time runs from 1500 HRS to 2500 HRS depending on the size and complexity. It will be estimated and half this estimate is required up front and the rest provide before the final plans are
sent.
Semi-Custom Design:
The builder picks the model of his choise and we agree upon a
design specification. When completed the design becomes the property of the designer. The price ranges from $1000.00USD to ±$2000.00, dependent on the size; single or multiple engined, and
complexity. It gives the builder the right to build as many models as he desires, but not sell or give out the plans. Half of the agreed upon price is required up front and the rest provide before
the final plans are sent.
Stock Design:
These are the models you see on the home page. Basic price
information is found on the Home page, for individual product prices go to the individual products web page and download the files found by clicking on the “DOWNLOADS” button below the
photo.
We try hard to incorporate any detail that would enhance your
chances of having a truly exceptional giant scale R/C aircraft model by spending almost as much time data collecting as drafting. All products start with a 3/6-view drawings, done to scale, and every
detail we can identify and accurately detail are shown. The plans do not include rivets and panel lines.
Hardware details are designed for the large scale R/C model are
done as closely as possible to the real aircraft. A CD is prepared that will accompany any Short Kit that will have detail photos that we
used to develop the drawings, and will include interior shots; when available for the builder that like everything showing to scale.
Design Specification
These are general Design Specification. The list shows my normal material use and design envelope.
Showing materials you might find in your plans, In the case of a Full or Semi-Custom designs it will be used as a guideline to help us arrive at the design plan.
Wing:
Built on attached jigs, including the flaps a/o ailerons
Wing, fixed or detachable; if so where and how much?
Ribs ~ 1/8” or 1/4” Balsa, Birch ply a/o Liteply
LE ~ Balsa nosed w/ 1/8” or 1/4” Birch ply & Liteply blades
TE ~ 1/32” or 1/16” Birch ply
Spars ~ “I” beams of 1/8” a/o 1/4” Birch ply & Liteply, w/ CF tubings &
rods
Glass covered 1/8” Balsa
sheeting
Fuselage:
Built in attached jig
Airframe & formers ~ 1/8” & 1/4” Balsa, Birch ply &
Liteply
Backbone and Keels ~ 1/8 & 1/4” Birch ply a/o Liteply
Longitudinal cut stringers ~ 1/8” Birch ply & Liteply a/o Balsa
sq.
Glass covered 1/8” Balsa sheeting
Vertical & Horizontal Stabilizer:
Built in attached jigs, includes Elevators & Rudders
Ribs ~ 1/8” or 1/4” Balsa, Birch ply & Liteply
LE ~ Balsa nosed w/ 1/8” or 1/4” Birch ply & Liteply blades
TE ~ 1/32” or 1/16” Birch ply
Spars ~ “I” beams of 1/8” a/o 1/4” Birch ply & Liteply, w/ CF tubing &
rods
Glass covered 1/16” Balsa sheeting