Boeing-Bell C-22 Osprey

Design is done. The search for the better propulsion system is underway. The RC radio controls programing will give her real world flying maneuvers and flight!!!

Down load the Brochure and Info/Price Sheet

Short Kit Includes:

Plan Sets; color & b/w, Construction Set, Construction Notes, Builder’s Material List and Laser cut wood parts.

Options Include:

Alum laser cut special hardware.

Composite nacelles are under development.

Landing gear by Century Jet

Design Specifications:

Scale                                       1:6

Length:                                    114.625"

Wingspan:                               101.833"

Width with rotors:                    169.000"

Height:                                     44.167"

Flaperons:                               +0/-70°

Nacelles (℄ to ℄):                     91.167"

Nacelles:                                 0 thru 90°

Nacelles [Yaw]:                       ±7°

Rudders:                                 ±30°

Elevator:                                  +25/-15%%D

Proprotor Blades                     3

Proprotor Diameter                 76.000"

Power                                      Electric

Fuselage

Fuselage will be in single piece w/ stabilizers attached

Air frame is of 1/8" & 1/4" Birch ply & Liteply

Stringers ~ 1/4" sq. balsa on 1-1/4" CT/CT

Sheeting ~ 1/8" balsa w/ glass & epoxy resin

Wing

One piece fitting into opening in fuselage top

Ribs ~ 1/8" & 1/4" Birch ply, Liteply & Balsa

LE ~ 1/8" Birch ply

TE ~ 1/32" Birch ply

Spars ~ "I" beam 1/8" & 1/4" Birch ply w/ additional CF tubes

Sheeting ~ 1/8" balsa w/ glass & epoxy resin

Vertical & Horizontal Stabilizer

Ribs ~ 1/8" & 1/4" Birch ply, Liteply & Balsa

LE ~ 1/8" Birch ply

TE ~ 1/32" Birch ply

Spars ~ 1/8"& 1/4" Birch ply w/ CF tubing

Sheeting ~ 1/8" balsa w/ glass & epoxy resin